News
News

Product features of Flange Mounted Electromagnetic Flowmeter in china

Release Time:

2023-01-09

1. Flange Mounted Electromagnetic Flowmeter in china tells you that electromagnetic flowmeter is widely used to measure the volume flow of conductive liquid and liquid-solid two-phase fluid. Flange Mounted Electromagnetic Flowmeter in China tells you that the measurement result has nothing to do with the temperature, viscosity, density, pressure, and liquid-solid composition ratio of the fluid, and the measurement result will not be affected when the conductivity changes in a wide range.
Therefore, the Flange Mounted Electromagnetic Flowmeter in China tells you that only after being calibrated with ordinary water, it can be used to measure the flow of other conductive liquids or liquid-solid two-phase fluid media without any additional corrections, so the electromagnetic flowmeter is A true volume flow meter.
2. Flange Mounted Electromagnetic Flowmeter in China tells you that there are no moving parts or throttling parts in the measuring tube of the electromagnetic flowmeter. Therefore, there is almost no pressure loss in the measurement, and there will be no clogging phenomenon. Especially in the occasions where the pressure in the processing pipeline is not high or relies on gravity self-flow, it is more appropriate to choose an electromagnetic flowmeter.
Through the above introduction and analysis of the Product features of Flange Mounted Electromagnetic Flowmeter in china, hope it helps you.

CONTACT US

Address

No.5, Shenzhen Avenue, Huanglong Industrial Park, Kaifeng, Henan, China

SUBMIT

Copyright© Kaifeng Meihe Automation Instrument Co., Ltd.

SupportedIPV6

Copyright© Kaifeng Meihe Automation Instrument Co., Ltd. All Rights Reserved

豫ICP备16003919号       SupportedIPV6

Powered by : www.300.cn