Gas Turbine Flowmeter from China is a reliable and accurate device used in measuring the flow rate of gas or liquid in various industrial applications. It is widely used in the oil and gas, chemical, and petrochemical industries. This flowmeter uses a gas turbine to measure the volume of gas or liquid passing through a pipe.
Principle of Operation
The working principle of Gas Turbine Flowmeter from China is based on the measurement of the rotating speed of a gas turbine placed in the fluid stream. A turbine rotor is placed in the fluid stream, and the fluid velocity causes the rotor to rotate. The turbine rotor is connected to a shaft that rotates a magnet. The magnet generates a magnetic field that is detected by a sensor outside the flowmeter. The frequency of the magnetic field is proportional to the fluid flow rate.
One of the significant advantages of Gas Turbine Flowmeter from China is its high accuracy. It has a high turndown ratio, which means it can measure low to high flow rates accurately. It can also handle a wide range of fluids, including corrosive and abrasive liquids.
Working Temperature
Gas Turbine Flowmeter from China operates within a specific temperature range. The working temperature of the flowmeter depends on the materials used in its construction. The most common materials used in the manufacture of the flowmeter are stainless steel, carbon steel, and aluminum. These materials can withstand temperatures ranging from -20°C to +150°C. However, if the fluid being measured requires a higher temperature range, then the flowmeter's material must be changed accordingly.
Conclusion
Gas Turbine Flowmeter from China is a reliable and accurate device used in measuring the flow rate of gas or liquid in various industrial applications. It works based on the principle of measuring the rotating speed of a gas turbine placed in the fluid stream. The flowmeter can handle a wide range of fluids and has a high turndown ratio, making it an excellent choice for industrial applications. However, the working temperature of the flowmeter is limited to a specific range based on the materials used in its construction.