Wholesale Classical Venturi Flowmeter is a popular flowmeter used in various industries such as chemical, petroleum, and water treatment. It is a differential pressure flowmeter that works based on the principle of Bernoulli's equation, where the fluid's pressure decreases as its velocity increases.
The Wholesale Classical Venturi Flowmeter consists of a converging section, throat, and diverging section. The converging section narrows the pipe diameter, which increases the fluid's velocity, causing a pressure drop. In the throat section, the velocity reaches its maximum, and the pressure drops to its minimum. The diverging section then expands the pipe diameter, slowing down the fluid's velocity and increasing the pressure again.
The Wholesale Classical Venturi Flowmeter has a nominal diameter that ranges from 1/2 inch to 120 inches. The nominal diameter refers to the pipe's internal diameter at the converging section's inlet. The flowmeter's accuracy depends on the pipe's straight length upstream and downstream of the meter and the fluid's properties.
The Wholesale Classical Venturi Flowmeter is suitable for measuring the flow rate of clean liquids, gases, and steam. It is commonly used in applications such as custody transfer, process control, and flow monitoring. The flowmeter is easy to install, requires little maintenance, and has a long lifespan.
In conclusion, Wholesale Classical Venturi Flowmeter is a reliable and accurate flowmeter used in various industries. Its principle of operation and nominal diameter make it suitable for measuring clean liquids, gases, and steam. With its easy installation and low maintenance, this flowmeter is a cost-effective solution for measuring flow rate.