A Venturi flowmeter is a type of differential pressure flowmeter that measures the flow of fluids, including gases and liquids. It works by using a constricted section, known as a Venturi tube, to create a pressure drop in the fluid. The pressure drop is proportional to the flow rate, so by measuring the pressure difference across the Venturi tube, you can calculate the flow rate of the fluid.
The classical Venturi flowmeter is a simple and effective design that has been used for many years. It consists of a converging section followed by a throat section and a diverging section. The pressure tap is located upstream of the converging section and the downstream of the throat section. The difference in pressure between these two points is proportional to the flow rate.

What are the Benefits of Choosing a Low Price Classical Venturi Flowmeter?

One of the main benefits of choosing a low price classical Venturi flowmeter is its affordability. Compared to other types of flowmeters, such as ultrasonic flowmeters or Coriolis flowmeters, Venturi flowmeters are relatively inexpensive. This makes them a great choice for applications where cost is a primary concern.
Another benefit of Venturi flowmeters is their accuracy. They can achieve accuracies of up to ±1% of the measured flowrate, which is comparable to more expensive flowmeters. This level of accuracy makes Venturi flowmeters suitable for a wide range of applications, including custody transfer and process control.
Venturi flowmeters are also easy to install and maintain. They don't require any external power sources or moving parts, which means they are less susceptible to wear and tear. This makes them a reliable choice for long-term use.

What are the Limitations of a Venturi Flowmeter?

While Venturi flowmeters have many benefits, they are not without their limitations. One of the main limitations is their limited turndown ratio. A turndown ratio is the range of flow rates that a flowmeter can measure accurately. Venturi flowmeters typically have a turndown ratio of around 4:1, which means they are not suitable for applications with highly variable flow rates.
Another limitation of Venturi flowmeters is their sensitivity to changes in fluid properties. Changes in fluid density or viscosity can affect the accuracy of the flowmeter. This means that Venturi flowmeters may not be suitable for applications where the fluid properties are subject to change.

Conclusion

In conclusion, a low price classical Venturi flowmeter is an affordable and reliable solution for measuring gas and liquid flow. It offers a high level of accuracy, ease of use, and low maintenance requirements. While it may have limitations in terms of its turndown ratio and sensitivity to changes in fluid properties, it is still a great choice for many applications. If you're looking for an affordable and accurate flowmeter, a Venturi flowmeter could be just what you need.