How the Clamp Connection Electromagnetic Flowmeter works. If a bluff vortex sounding body is set in the fluid, two regular vortices will be generated alternately from both sides of the vortex. This vortex is called Karman vortex street. In a certain flow range, the vortex separation frequency is proportional to the average flow velocity in the pipeline. The capacitive probe or piezoelectric probe (detector) is installed in the vortex generator and the corresponding circuit is configured, which constitutes a capacitive detection Clamp Connection Electromagnetic Flowmeter sensor. Or piezoelectric detection type vortex flow sensor.

The Clamp Connection Electromagnetic Flowmeter adopts a connecting plate with a right-angled trapezoid cross-section, and the right-angled trapezoid hypotenuse is the opposite inner side of the cross-section. When in use, the connecting plate is fastened to the pipeline with a clamp, which saves time and effort.
In addition, a stuffing box is arranged on the connecting interface where the connecting plate of the Clamp Connection Electromagnetic Flowmeter is connected with the pipeline, and the sealing performance is good, the sealing strength is high, and the use is convenient.
Through the above introduction and analysis of how Clamp Connection Electromagnetic Flowmeter Works, hope it helps you.