

Products
Electromagnetic Heat Meter
Electromagnetic Heat Meter is a kind of measuring instrument for measuring the heat released by the heat carrying fluid in the heat conversion system. It uses high-precision and high reliability electromagnetic flowmeter as flow measurement, and platinum thermal resistance with high precision and high stability as temperature measurement, so that the thermal energy meter has very excellent measurement performance. It can be widely used in the heat measurement of central heating, heating and air conditioning in civil residential quarters, office buildings and enterprises and institutions.
Electromagnetic Heat Meter is a kind of measuring instrument for measuring the heat released by the heat carrying fluid in the heat conversion system. It uses high-precision and high reliability electromagnetic flowmeter as flow measurement, and platinum thermal resistance with high precision and high stability as temperature measurement, so that the thermal energy meter has very excellent measurement performance. It can be widely used in the heat measurement of central heating, heating and air conditioning in civil residential quarters, office buildings and enterprises and institutions.
Characteristics of electromagnetic calorimeter
Using 16 bit single chip microcomputer for data operation, platinum thermal resistance for temperature measurement, and electromagnetic flowmeter for flow measurement, the measurement accuracy is high, the application is stable and reliable, and the performance is excellent.
·The measurement accuracy is not affected by the changes of parameters such as viscosity, density, pressure, conductivity and fluid distribution of heat carrying fluid.
·The measuring pipe has no resistance parts, no pressure loss and is not affected by bad water quality.
·The measuring flow range is wide, and the flow rate can be set arbitrarily in the range of 1m / S ~ 10m / s.
·Large screen LCD backlight display mode ,which can read clearly in strong light and no light.
·It has the function of simultaneous display of accumulated heat, accumulated flow, instantaneous heat, instantaneous flow, inlet water temperature, outlet water temperature, temperature difference and other data, and can query and display parameters such as flow rate, power failure record and so on.
·The enthalpy correction method with random temperature change is adopted to ensure accurate measurement under different water temperatures.
·It has a unified DC signal and frequency signal output function, and this function can be switched between heat and flow parameters.
·It has the functions of batch processing (quantitative output), equivalent pulse output and keying direct zero clearing.
·With RS-485 (RS-232, M-BUS and HART optional) digital communication output, it is convenient to realize remote communication.
·With password protection function, those without password cannot modify working parameters.
Basic technical parameters of electromagnetic calorimeter
·Power supply: 220V AC (110VAC ~ 245VAC), 24VDC
·Power consumption: ≤ 20W (supporting power consumption)
·Accuracy level: Level 1 or 2 (matching accuracy)
·Protection grade: IP65
·Ambient temperature: Class A
·Temperature resolution: 0.01 ℃
·Optional temperature measurement range: - 30 ℃ ~ 180 ℃
·Temperature difference measurement range: 1 ℃ ~ 90 ℃
·Maximum flow reading (M3): 99999999 (ten digits)
·Maximum heat reading (Mwh): 99999999 (ten digits)
·Heat unit: kJ, MJ, GJ, kwh, Mwh can be optional
·Analog output: 4 ~ 20mA DC / 600 load resistance (can be switched between heat and flow parameters)
·Pulse output: maximum frequency 5000Hz, pulse width 0.1ms ~ 999.9ms (can be switched between heat and flow parameters)
·Communication: RS-485 (RS-232, M-BUS, Hart and other optional)
2. Technical parameters of electromagnetic flow sensor:
·Nominal diameter: DN50 ~ DN1400mm
·Nominal pressure: 0.6MPa ~ 4MPa
·Lining material: high temperature resistant rubber, PTFE, PFA, F46
·Electrode materials: molybdenum containing stainless steel, Hastelloy B, Hastelloy C, titanium, platinum / iridium alloy, tantalum
·Structural form: split type and integrated type
·Medium temperature: - 30 ℃ ~ 180 ℃
·Connection mode: flange type
3. Technical parameters of temperature sensor:
·Sensor type: PT1000
·Installation method: protective sleeve
·Temperature measurement range: - 50 ℃ ~ 200 ℃
·Conductor length: 0.6m ~ 15m
Products
MESSAGE
If you are interested in our products, welcome to contact us!
CONTACT US
Tel/WhatsApp/WeChat
Address
No.5, Shenzhen Avenue, Huanglong Industrial Park, Kaifeng, Henan, China
Copyright© Kaifeng Meihe Automation Instrument Co., Ltd.
SupportedIPV6
Copyright© Kaifeng Meihe Automation Instrument Co., Ltd. All Rights Reserved
豫ICP备16003919号 SupportedIPV6
Powered by : www.300.cn