MEIHE METER


Electromagnetic Flow Meter

Electromagnetic flowmater is an instrument that uses Faraday electromagnetic induction principle to measure the flow of conductive fluid, the instrument generates electromotive force when the conductive fluid pass through the external magnetic field.

Vortex Flowmeter

Flange mounted vortex flowmeter is one of the most commonly used structural forms. Its body itself does not have a connecting flange. When connecting with the pipeline, the flowmeter can be clamped between two special flanges ,and fastened with bolts.

Wall Mounted Type Ultrasonic Flowmeter

The measured fluid of external clamp type ultrasonic flowmeter can be water, seawater or uniform liquid such as oil and slurry, conductive or non-conductive, corrosive or non corrosive liquid. The fixed external clamp type ultrasonic flowmeter is equipped with backlight LCD, which can display the instantaneous flow, positive, negative, net cumulative flow, flow rate, time, analog input and other data.it is suitable for steel, stainless steel, cast iron, cement pipe, copper, PVC, aluminum, FRP and other dense pipes.

Handheld Ultrasonic Flowmeter

The hand-held ultrasonic flowmeter uses an external clamp type sensor to measure the liquid flow. The installation process is very simple, and easier to operate. It is especially suitable for flow balance test and flow monitoring: drinking water, river water, sea water, cooling water, hot water, industrial sewage, lubricating oil, diesel oil, fuel oil, chemical liquid, etc

Classical Venturi Flowmeter

Classical Venturi tube is used to measure the flow of single-phase stable fluid in closed pipelines, and is often used to measure the flow of air, natural gas, gas, water and other fluidsClassic venturi tube has simple structure, durability and stable performance;

Temperature Sensor

Temperature transducer refers to a sensor that can sense the temperature and convert it into an available output signal. Temperature sensor is the core part of temperature measuring instrument, which has a wide variety. According to the measurement method, it can be divided into contact type and non-contact type. According to the characteristics of sensor materials and electronic components, it can be divided into thermal resistance and thermocouple.

portable ultrasonic flowmeter

portable ultrasonic flowmeter uses an external clamp sensor to measure the liquid flow. The portable ultrasonic flowmeter makes use of the principle of low voltage and multi pulse time difference, and adopts the digital detection technology of high-precision and ultra stable double balance signal differential transmission and differential reception. When the ultrasonic beam propagates in the liquid, the flow of the liquid will make a small change in the propagation time, and the change of the propagation time is directly proportional to the flow rate of the liquid. At zero flow, the time required for the two sensors to transmit and receive sound waves is exactly the same (the only technology that can actually measure zero flow). When the liquid flows, the sound wave transmission time in the counter current direction is greater than that in the downstream direction. The installation process is very simple, and easier to operate. It is especially suitable for flow balance test and flow monitoring: drinking water, river water, sea water, cooling water, hot water, industrial sewage, lubricating oil, diesel oil, fuel oil, chemical liquid, etc.

Totalizer

Totalizer is the collection, display, control, remote transmission, communication, printing and other signals for the field temperature, pressure, flow and other processing, constitute a digital acquisition system and control system, suitable for the flow accumulation measurement control of liquid, general gas, superheat steam, saturated steam and so on, etc.

SOLUTION


MEIHE METER


Kaifeng Meihe Automation Instrument Co., Ltd.


Kaifeng Meihe Automation Instrument Co., Ltd. is located in Kaifeng, Henan, China, the "ancient capital of seven dynasties" with a long history. Since 2011, the company has been engaged in the production and manufacturing of flow instruments. Since its establishment, the company has gradually grown into a modern production enterprise with strong technical force, advanced production equipment and high-precision testing instruments through unremitting efforts, continuous innovation and enterprising spirit.

Precision is our constant pursue.

Kaifeng Meihe Automation Instrument Co., Ltd.


Kaifeng Meihe Automation Instrument Co., Ltd. is located in Kaifeng, Henan, China, the "ancient capital of seven dynasties" with a long history. Since 2011, the company has been engaged in the production and manufacturing of flow instruments. Since its establishment, the company has gradually grown into a modern production enterprise with strong technical force, advanced production equipment and high-precision testing instruments through unremitting efforts, continuous innovation and enterprising spirit.

More
Kaifeng

NEWS


MEIHE METER


CONTACT US

Address

No.5, Shenzhen Avenue, Huanglong Industrial Park, Kaifeng, Henan, China

SUBMIT

Copyright© Kaifeng Meihe Automation Instrument Co., Ltd.

SupportedIPV6

Copyright© Kaifeng Meihe Automation Instrument Co., Ltd. All Rights Reserved

豫ICP备16003919号       SupportedIPV6

Powered by : www.300.cn